This is a Prusa Mendel parts set printed in natural 1.75 mm PLA on my own RepRap Mendel.
 The grid in the image is 5mm.
This set comes complete with a Wades Extruder, Springs, Heater Pack Belts.

Full details and Build Instructions for this machine can be found at: http://www.reprap.org/wiki/Prusa

The PLA Bushings are supplied as printed because you need to match them to your rods.
All the other parts have had a Primary Clean. The holes are reamed to size and are ready to assemble.

Everything has been printed on a Heated platform so the parts are Flat.
Infil Density is high so the parts are very strong.

I have also included some additional:

Bar and belt clamps.
PLA Bushings.

Cogs for the Wades Extruder.
Grub screws for the cogs.
M8 Bolts for the Wades extruder.
 2 Resistors (6R8) for the Heater
 5 Thermistors (100K) for the Heater
2 Meters of Teflon Insulated wire.
2.5 Meters of T5 belt. (Not in image)
Springs for the Z Axis and Bed. (Not in image)

Everything listed here is the same parts and materials that I use on my own reprap Mendel.

Total Wight of the Plastics is around 600 g
Packaged weight is around 800 g

*** FREE UK SHIPPING ***
 

Any Questions, you can ragularly find me in #reprap on irc.freenode.net