Listing

RepRap Panelolu for Delta printers: LCD+Encoder+SDSL card reader for standalone printing

Click on image above for a full resolution view (will open in new window).

Description:



The Panelolu is a display and control solution for your RepRap Rostock or other Delta 3D printer. It comes with a simple connector for the expansion header on Sanguinololu; however the ribbon cable can easily be broken out into a number of individual connection for RAMPS etc.Update: This listing is aimed at Delta printer users who are unable to use our Panelolu2 controller for technical reasons. If you have a conventional X-Y-Z printer then please see our listings for the Panelolu2 which has replaced the original Panelolu. (It is supplied fully assembled and tested, has adapter boards so no cable assembly is required, and uses less pins).

The display+encoder combination allows for printing without a computer connected, as well as real-time alteration and saving of firmware settings - a significant advance in usability. Full details are available on our blog, along with assembly instructions. The stl and scad files (so you can print your own case) are available on thingiverse

To access these features with the Sanguinololu requires the ATmega 1284 chip because of the extra memory required. If you have a Sanguinololu with a 644P then you need to upgrade to the ATmega1284P - see this listing for the AT1284. If you already have an ATmega 1284P there is no need to get another - details of firmware changes are on our blog. On request we will supply a brief HOWTO outlining the firmware upload procedure.

The circuit board and LCD headers are supplied unsoldered, but only simple through-hole soldering is required. Please write to us at think3dprint3d@gmail.com if you would prefer us to solder the components at an extra cost of £4.00.

Kit Contents:

  • 20x4 LCD screen white on blue or dark blue on grey depending on availibility.
  • SDSL card reader.
  • Click encoder for control, potentiometers for brightness and contrast, reset switch, circuit board and headers (Right hand control option).
  • Cables and connectors required to put it together as described on the blog.
  • M3 socket cap screws, nuts and small screws required for the assembly
  • Please note the plastic parts are not included - you can print them from thingiverse.

Check out our other items



Shipping

UK shipping is by First Class Recorded Large Letter, international by Airmail Small Packet (untracked). eMakershop will automatically combine postage. If we receive your order before 10:00 am UK time Monday to Friday we aim to post the same day, otherwise the following day. Orders received later on a Friday or before 09:00 am UK time on Saturday will normally be posted on Saturday.

IMPORTANT NOTES

  1. To keep down postage costs for this item outside the UK, we use an untracked airmail service. if you want your parcel to be fully tracked, please enquire before buying. (Please write to us at think3dprint3d@gmail.com)

  2. We have unfortunately had to exclude some European countries from this listing because of a large number of items going missing in their postal systems. If you are in one of the excluded countries and want to buy from us we will be happy to quote you for shipping by fully tracked fully insured mail if available, or else by courier services. (Please write to us at think3dprint3d@gmail.com)

     

EXCLUSIONS

EUROPE: Albania, Belarus, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Greece, Macedonia, Malta, Moldova, Montenegro, Russia, Serbia, Ukraine

AFRICA: All of Africa except South Africa

 

Check out our other listings here

 

Think3dPrint3d is registered for VAT and all products are VAT inclusive. If you require a VAT invoice please contact us.

Cost:

£30

Shipping

First itemSubsequent items
National (United Kingdom) £3.00 £1.00
Continental (Europe) £4.00 £2.00
Rest of the world £5.00 £2.00

Quantity available:

16    Sold: 54

Quantity

Listed by:

Think3DPrint3D  contact seller