Listing

ZZ (MN17-F)

Click on image above for a full resolution view (will open in new window).

Description:


This is a listing for one Fulling Motor model FL42STH47-1206A  NEMA 17 (42 x 42 mm) high torque 1.8 degree stepper motor, ideal for the RepRap Prusa, Mendel90 and similar 3D printers, as well as CNC and robotics applications.

 

For more information on choosing stepper motors for Reprap check the wiki: http://reprap.org/wiki/Stepper_Motors.
The holding torque is particularity important, especially for Extruder, X and Y axis. These motors are 4.4 kgcm (44Ncm) and we use them successfully on our printers, even at high speed.

 

We have sold hundreds of these motors over the past few months and are confident that they are the lowest-priced high-torque NEMA17 stepper motors on the UK market.


The motors are manufactured by one of China's leading hybrid stepper motor manufacturers, established in 2000 as a German-Italian-Chinese joint Venture:

NEMA 17 Stepper Motor Model  FL42STH47-1206A - Specifications

 
Item Specifications
Step Angle 1.8 degree
Step Angle Accuracy ±5% (full step, no load)
Resistance Accuracy ±10%
Inductance Accuracy ±20%
Temperature Rise 80.C Max
Ambient Temperature -20.C~+50.C
Insulation Resistance 100MΩMin. ,500VDC
Dielectric Strength 500VAC for one minute
Shaft Radial Play 0.02Max. (450 g-load)
Shaft Axial Play 0.08Max. (450 g-load)
Max. radial force 28N  (20mm from flange)
Max. axial force 10N 
 

The motors we are selling are the 6-wire (dual bipolar/unipolar) version of Model FL42STH47, which we have converted for use as standard 4-wire bipolar motors by removing the extra 2 wires (white, yellow), as shown in the wiring diagram below:


 



When used as 4-wire bipolar motors, the performance and torque output of the 6-wire 1206A motors is identical to the 4-wire 1684A motors, as given in the following extract from the Fulling Data Sheets:-
 
Model No. Rated
Voltage		 Current
/Phase		 Resistance
/Phase		 Inductance
/Phase		 Holding
Torque		 # of Leads Rotor
Inertia		 Weight Detent
Torque		 Length
Single Shaft V A Ω mH Kg-cm   g-cm2 kg g-cm mm
FL42STH47-1684A (4-wire) 2.8 1.68 1.65 2.8 4.4 4 68 0.35 200 48
FL42STH47-1206A (used in 4-wire mode)

Dimensions and Cabling

Cable length 0.3m, supplied with 0.9m of loose colour-coded extension cable and heatshrink sleeving to make it up to a maximum 1.2m. Frame Size: Length = 47mm

Shipping

Motors are carefully packaged, wrapped and boxed. We offer the following postal/shipping services

  • UK Economy by myHermes 48h+ courier, tracked and insured.
  • UK Expedited by Interparcel/TNT overnight courier, tracked and insured. at a flat rate of £10 up to 20 motors.
  • European Union - up to 5 motors (2kg, Air post limit) by Parcelforce International (fully tracked) where available, or Airmail International Signed For (partly tracked), depending on quantity ordered. 1 or 2 motors usually Royal Mail, 3, 4 or 5 usually Parcelforce.
  • European Union - more than 5 motors - please request a quote for Courier service (starting at £20 per parcel).
  • Rest of the World - up to 5 motors (2kg Air post limit) by Airmail International Signed For (partly tracked)
  • Rest of the World - more than 5 motors - please request a quote for Courier service (starting at £45 per parcel

​Please write to us at think3dprint3d@gmail.com to request a quote for courier shipping  outside the UK. 

 

Orders received before 10:00 am UK time Monday to Friday we aim to ship the same day, otherwise the following day. Orders received later on a Friday or before 09:00 am UK time on Saturday will normally be shipped on Saturday (Monday for courier shipping).

 


 

Cost:

£9.95

Shipping

First itemSubsequent items
National (United Kingdom) £3.50 £0.50
Continental (Europe) £10.00 £2.50
Rest of the world £14.00 £5.00

Quantity available:

    SOLD OUT request more    Sold: 147

Listed by:

Think3DPrint3D  contact seller

Sep - 17 | By: |